Paper « Background Cover « Photoshop Tutorials

8. Now add a new layer and chouse a Foreground color D7B683 and Background ECCA8E. Select Foreground and fill in the paper. Ok now go to Filter Texture, Textureize. Chouse Canvas, Scaling 100 % and Relief 1, and top.

Select the bottom third of the paper along the burn mark. Click Edit=> Transform=>skew. Move the Bottom middle handle to the right to skew the bottom third.

I like ur crumpled up paper effect, but i get stuck in the beginning. can u tell me how u give gradient in multiple strokes?

In this tutorial, we will be looking at how to recreate the effect of a folded piece of paper using PhotoShop CS4.

Now grab the Eraser Tool and set the brush to a Chalk 60 pixels or any other brush type that has that same design. Then erase some edges of your paper design.

In this tutorial I'll show you how to make a burnt scrap paper effect. This has been found useful in optimizing Google Ads and making them �pop� and stand out a little more. The results you will get are slightly different each time. This is one of my results:

Title: Free photoshop tutorial learn how to create torn paper and punch a hole Description: Great photoshop tutorial for web designers to learn new techniques and design torn or old paper

?????????????? ?????? ?????? ???? ???????? ???????????????? ???????? ???????????? ?????????????????????????? ???????????????? ?????? ???????????? ?????????????? (????????????????, ?????? ????????????????????????, ??????????????, ????????, e-mail,www,??????????,????????????) ?????????? ???????????????? ?????????????? ?????????????????????????????? ?????? ?????????? ?? ???????? ???? ????????????????????: ???????????????? +79133913837 ICQ: 6288862 Email: [email protected] Skype: prodawez

With respect to great tutorial here, does anyone know a printing company that will print your design on actual cardboard paper for business card possible with embossed text print?

In this Photoshop tutorial we'll be creating a scrap of notepad paper like the ones you've probably seen used in popular websites and blogs. Throughout the lesson I'll also be discussing the things I take into consideration when preparing a graphic like this for the web.

Next, go Filter -> Artistic -> Sponge. Make sure your foreground color is still #cfbba9, and the background is #000000. Set the Brush size to 10, Set the definition to 10, and Smoothness to 6, and hit OK.

Yesterday when I was surfing on the net, I found some great-looking websites using torn paper effect in their web design and I decided to go into Photoshop tools and find the ones that can do this effect easily.

Photoshop can help us create many wonderful effects. I'm sure you have noticed the torn paper look in my site's main interface, as well as on my navigation board above.

make a Push paper cloth pin design,Advanced Photoshop Tutorial - Free Online Photoshop Tutorial,Online Tutorial Adobe Photoshop 7 Training Courses Tutorials

Step 4: Now go to Image > Adjustments > Brightness / Contrast. Increase your brightness by +75% and your contrast by +25%. Press OK. If you are looking for a crumpled paper effect, you can stop right here. Since we are aiming for a paper-bag style color, however, there is one more step that we need to complete.

I just felt like making a simple tutorial on how easy it is to use Photoshop standard textures and set up some layer styles to make a great realistic piece of paper. So in this tutorial you will see how easy it is to make a realistic paper in Photoshop.

Create shape as shown using pen tool. This will show the inner part of the carry bag. Fill it with white color.

You can create crumpled or wrinkled paper in Adobe Photoshop CS3 by applying just a few filters. In this video tutorial, you'll learn how to create crumpled paper in Photoshop CS3.

In this tutorial you have a chance to learn how to create a sheet of paper whose angles are stuck together with tape. Step 1 Create a new Document (ctrl+N) and set the dimensions whatever you like (mine dimensions are 400x400px). Step 2 For Foreground color set #FEFBDF and take the Rectangle tool. Using rectangle tool create a rectangle with dimensions which you like. Step 3 Double click on a new made Shape and set the options from the pictures below. Drop Shadow Gradient Overlay Stroke Note: For each point of gradient,opacity,location and used color is shown On Gradient Overlay Step 4 Choose now "Add ancor Point tool" and click on the border of shape which you want to edit. When you have created the ancor of points you must take the Direct Selection tool. Using Direct Selection Tool move the points to get the "curve paper effect" Step 5 Now we will create a tape whic will be on the paper edges. Using Rectangular Marquee Tool create a small rectangle. After that take the Polygonal Lasso tool to cut the rectangle's edges, in order to get the effect of turn off tape. When we outlined the cut off part, press delete to erase that part of selection. Do the same on the other side of rectangle. Step 6 Add the shadow and border to the part of tape ( white rectangle) and decrease its opacity to 60%. After that copy that layer and set it on paper angels, and using shourtcut CTRL + T rotate the part of tape where it is required. Step 7 Finally, we will add some text on paper and we're done! :)

Title: How to make a crumbled old twisted paper sheet in photoshop Description: Great photoshop tutorial for web designers to learn new techniques and make old crumbled paper

[...] This is a Photoshop tutorial on creating and old, burnt paper texture from scratch. Again, you don't absolutely need to follow this tutorial to the end result, but the Photoshop techniques you learn from it are solid. Check this piece out over here. [...]

Lets recycle some paper and create a water pot and paper cups made of mashed paper.Lets open a new file in your favourite photoshop software version.Then choose a custom size you may choose any size, I will pick Height & width 500�500 pixels and Resolution 72 using Mode RGB Color.

Title: Learn how to draw a Pen and irregular piece of paper using photoshop software In this computer cs2 dummy photo shop tech tutorial learn how to make or design a pen and paperUse photoshop techniques to make pen and paper - photo shop paper effects

Step 1: Getting started. Create a new file, a bit larger than you want your finished paper to be, size doesn't matter. Make the background of your file white. Next you will have to create a new layer. For those new to Photoshop to create a new layer go to file, click until the drop down box appears, then select new. The new layer will then be shown on screen, as this point it might be an idea to give it the title of step one and change the background contents to white. Although a quicker way to create a new layer is to click Ctrl-Alt-SHIFT-N.

Step3: Creating the paper lines. Create a new layer, LayerNew Layer... (Shift+Ctrl+N). Change the foreground color to #6072b5. Using the Line Tool , while holding shift draw three line to get the effect below. You can draw each line on its own layer.

You'll almost always want to add a little drop shadow to your paper scraps. Double click on the left side of the layer, right click and choosing Blending Options or choose Drop shadow from the lower left pop up menu (I'm not saying those again!)

Choose #B7B7B7 as FOREGROUND COLOR, and with the gradient tool paint a gradient like the image below shows. Set the CREASE layer OPACITY to something like 40%. Don't deselect your selection. If you accidentally deselected it, then go to the menubar and choose: SELECT > RESELECT and the selection will reappear. Look at the image on the right to see how the gradient looks on the paper texture.

1. Start with a new file,250�250, with white as background.

Yes, it is possible to find a good web host. Sometimes it takes a while. After trying several, we went with Server Intellect and have been very happy. They are the most professional, customer service friendly and technically knowledgeable host we've found so far.

[6] Your image will now look like this.

Step 1: First open any image.

Step 1: First open any image.

Adobe� Photoshop� Elements 7

In this tutorial, I will teach you how to create the burnt paper above.

[1]-First of all Open New Docuement of Custom size, Height & width 450�450 pixels, Resolution 72 & Mode RGB Color

Create a new document what ever size you desire im going to be using a canvas size of 600 x 250 pixels. Double click your background layer to unlock it, unlocking the layer will make it editable. Add a simple gradient overlay to your background layer, im going for a greeny gradient.

Step1: Create a new image File > New (ctrl +n) set the width and height to:

When your selection looks like the image above press SHIFT+CTRL+I to inverse your selection and press the DELETE key. If you did everything right you should have what I have below.

Select direct selection tool and adjust the nodes to distort it.

5?? Now, this part is a bit tricky.?? Using your Polygonal Lasso Tool (L), make a ridged selection similar to the following across the bottom of your whole navigation.?? Then choose Edit > Clear to delete the selection, and you'll have something that looks like this:

Paper-card is the key material for this medium, so it's relatively cheap, easy to produce and process, and it can be recycled after use.

NOTE: I will not use the whole workspace. It's just I prefer to work in a much bigger workspace.

Nice tut Collis

Copyright DesignTutorials.info 2005 | Contact | Privacy Policy

Height = 600

Along the way I will be using various image adjustment tools, a bunch of filters, layer blending options and some basic selection techniques. Have a try!