| Photoshop Tutorials » Effect » Glow |
Go back to the layers panel, create a new layer on top of the britney spears layer, hold down ctrl + shift and hit i to invert the selection.
1. Create a new document and then create a new layer and fill it with whatever colour you want(I used black because the contrast is more obvious) and enter a text.
Choose the photo that you want to use for the Glowing Plastic Wall Photo Montage, try to find one with a solid background color like ours, the effect will look much better and the process will be much easier, keep in mind that the final result will depend on the Background color, so try to find a light/brilliant one like ours.
And DONE! your buttons it's finally done, now repeat the Text steps with the other three ones and you will get your Rounded And Glowing Menu.
Photoshop users are earning up to $900 a week while you're reading tutorials here. Click here to find out how to get ahead of them now!
Author: Globator Making cool glowing text in Photoshop. Great for headers and logos. This time we will create a glowing text effect:
In this not so difficult step-by-step tutorial I will show you how to create really sharp-looking glowing woman silhouette. Actually, in this way you can create glowing silhouette of any object.
Copyright � 2009 hawksmont Universe :) by Irmina hawksmont Kasprzak hawksmont blue Universe designed by hawksmont � Creatt.com � Creatt.pl � Powered by Wordpress.
Creating Black and whites is a great way to simplify or shift focus in a photo. You have seen great black and white photos out there in Magazines and in galleries on the web, Black and whites are everywhere. We will learn just how to make great black and whites in a matter of minutes. We will start with the basic Desaturation of an image, learn why that is not-such-a-good way to create black and whites, and experiment with several different methods before settling with the best black and white conversion. After the conversion we will look at vignetting, tweaking the channels, and subtle image toning. All of that plus the usual load of little tips and tricks will all be in this video, watch, learn, enjoy! | More...
Every time you use a layer adjustment, check (v) -use previous layer to create clipping mask- In other steps, when we change the color or the levels, we always create a clipping mask. I used +20 for brightness and contrast, but it differs for every photo, so play a bit with the settings till you are happy about it.
In our Photoshop Tutorial, we will create a Glowing Neon Girl from scratch. Throughout this tutorial, you will simply learn how to make some cool Glowing Effects in Photoshop. This is quite a little long so patience is a virtue.Take a look at the Preview of our Final Image.
In this Photoshop tutorial we'll be experimenting with layers and styles to create a cool glowing orb and dial effect. This tutorial is written with an intermediate to advanced user in mind but I think anyone who knows their way around Photoshop shouldn't have a problem reproducing this effect.
Lets first start by drawing a nice curvy path with the pen tool that we'll use as our main wrapping glow line. In the Paths palette be sure to rename the path so you don't loose it when we create a new one.
[...] Glowing text in space scene Create a outer space background with text or a logo for your header or background. [...]
Submitted by Martin on 2007-02-27 11:56:28. Since then read 25681 times. Scored 4.31 points out of maximum 5 by 64 votes.
Hey guys, here's my version. I made a couple of variations [9] as well to make a wallpaper pack. I present to you, �Christmas Lights�: [ http://nokadota.deviantart.com/art/Christmas-Lights-107095755 ]
Welcome to TutorialFeens.com! On this site, you will find various photoshop tutorials that you may find interst in. Whether you're new to photoshop, or an advanced user, you will find many tutorials here that will be helpful to you. Please feel free to look around, if you have any questions or comments, gladly send me an e-mail.
[...] Create Glowing Buttons in Photoshop - 1 Minute Ago This tutorial will show you how to make a unique glowing button for navigation designs. Link : HERE [...]
Join our mailing list to receive the ShowAndTell-Graphics Newsletter. You will get an email whenever a new tutorial is added, or when new Myspace layouts are created.
In this Photoshop tutorial you will see how to make an abstract effect that I would like to call the 3 glowing eggs.
The first step is to take the image in which you want to give a soft glow and duplicate that layer by pressing Ctrl J. Then select the entire layer either by using the rectangular marquee tool or by pressing Ctrl A and after that copy that layer by going to Edit > Copy or by perssing Ctrl C
Go to "Layer > Rasterize > Type". Now our "G" is no longer a text and we can work with it freely. Next step, "Edit > Trasnform > Perspective". Hold "Shift" and move the left bottom control point to left as I did. Press "Enter" to apply the changes.
Intensify photos with vivid colors in just a few simple steps! This Photoshop effect is perfect for fun vacation photos and is easy for novice Photoshop users.
This will be a short and simple tutorial for photo edit. I try this during my lunch time yesterday and find it is quite interesting. So, I wish to share with you guys too. This is best for those who like photo with glow effect or a little fantasy effects. Well, check this out.
Glow Effect 1, In order to add a little flair to the glow, you should prepare the background if possible. To do this, I used filter|render|lighting effects with a single omni light in the middle. This will darken the edges. 2, Render your text or your graphic in a new layer above the background. Choose a nice contrasting color for your graphic to enhance the glow. I used the same color as the background. this will change later. 3, Now add a new layer between the background and the graphic layer. Ctrl-click the graphic layer to load the text or design as a selection. Now go to select|feather, I used a radius of 10, but this depends on the size of the graphic. Normally it will be much more. Dont worry if the edges aren't visible. Now select a color for your foreground. I used red. Press alt+backspace to fill the feathered area. Do this a number of times. I did it 4 times. 4, Now add a new layer above this one and repeat the steps. This time feather the selections less, only fill it a few times, and use a contrasting color. I feathered the selection 5, use a yellow color and filled it twice. 5, One last time, add a new layer, select your graphic. This time I feathered the selection only 2, and filled it once with white. Now we could leave it like this and it looks okay. There are a couple of things you can do to make the effect stronger though. 6, If you just de-activate the graphic layer it gives an interesting 'hot' looking effect as such. 7, To achieve this look, change the blending mode of all the layers to screen, change the blending mode of the layer with the text or graphic on it to color burn. Then use filter|blur|gaussian blur with a small radius to smooth it out a bit.
1. Start by selecting the brush tool, select the color white, then go to the custom brush panel, (default located at the top right corner). Give it a brush tip shape as in the image below.
This time I will commit myself and try to expose an nice illustration technique in a few steps instead of the usual massive explanations I love to write. This tutorial explains how to create some glowing lights brushes using the Lens Flair filter that comes in the default installation of Adobe Photoshop CS2 and previous versions.
The following the steps will teach you how to give a glow effect to an image:
1) Create a new image 400�300 with white background.
Now lets add something to inlay your text into. Create a new layer below your text layer and make another gradient. Make sure that the direction of light to dark is opposite of the gradient in your background.
STEP 2: Type your Text. We use a yellow color.
While holding down CTRL, click the text layer to select it.
it is always good to keep a copy of the original image in a layer.
Pen Tool - Use this tool to draw the curve in the first place. You can click and drag to create curves on the fly. Don't worry if the curve is not perfect, you can modify it later.
Step 2: Go to Filter > Blur > Radial Blur and use these settings
Here is some of the elements a web 2.0 graphic can contain (note I dont say must contain) some glossiness, sleek curved lines or just a unique design.
Open the rendering that you want to edit in photoshop and make a copy of the layer.
We are going to create a gradient, to create a gradient click on the Gradient Tool.
Use the Marquee Tool and select a part of the bright area, then bring that selection into a new layer (Ctrl + J). Bring it over to the left edge and fit it in the corner. (If you use Ctrl + T to transform the layer, then control and move the corners of the box it will skew them to get a better fit.)
1-I have not the same resulat as in step 4.
Next we're going to stroke the line. Select the brush tool and select a solid circle brush and set the size to 3-4 px. Now click back over to the Line Tool and right click (alt click for Mac users) select "Stroke Line". In the new dialog box set it to brush and check the "Simulate Pressure" option.
a. Now make a new layer. I chose to make a letter, but you can make an aura around any shape you want. Anyway make the letter, word or shape you want on this layer. Whatever shape you choose to make, make sure its black.
Just a little tip - when you are done with paths and this effect, and you want to draw shapes, make sure you select the first of the three squares, or 'Shape Layers' and not 'Paths'. Obviously we can keep 'Paths' on for now because we need this option.
Mail (required)
It's been a while since I made a tutorial here in Naldz Graphics. For this month Im gonna focus more on creating tutorials for everyone. Today you will learn how to create a Glowing Effect Scene in Photoshop.
