Edit

How to Format a Hard Drive

Edited byStephen Waines and 28 others

Article
Edit Discuss History
Format a Hard Drive

This article includes the basics for high-level formatting a hard drive.

Edit Steps

For Windows XP

  1. 1
    If you want to save any of the data on the disk, back it up by copying it to a CD or another hard drive. Formatting will destroy ALL of the data on the disk.
  2. 2
    Use the Windows XP CD-ROM to boot the computer.
  3. 3
    Select the "Recovery Console" option.
  4. 4
    At the prompt, type FORMAT C:
  5. 5
    Also open computer, then right click "local disk (c:)", select "format...", click start.

For Windows 9x (95, 98, Me)

  1. 1
    If you want to save any of the data on the disk, back it up by copying it to a CD or another hard drive. Formatting will destroy ALL of the data on the disk.
  2. 2
    Use a startup floppy (sometimes called a "boot disk") to obtain a DOS prompt.
  3. 3
    Type FORMAT C:

For Linux or BSD

  1. 1
    Boot from a livecd
  2. 2
    Open a terminal window (usually something like xterm or konsole)
  3. 3
    Log in as root by typing su or sudo -i
  4. 4
    Type mkfs.ext2 /dev/hdxy where you change the ext2 by the filetype you want (e.g. ext2, ext3, reiserfs,...) and the x by the letter of your drive and y by the number of the partition you want to format. (e.g. /dev/hda1, /dev/hdc32,...). Using the -j option (mke2fs -j) will create the ext3 (or journaled) file system that is much more resistant to the unexpected power loss.
  5. 5
    Under Linux, you can also format the hard drive in FAT file system that is readable from Windows (use mkfs.vfat instead of mkfs.ext2). However such partition cannot store the root of the Linux operating system.

Edit Video

Edit Tips

  • Partition(s) must be created on a drive before it is formatted.
  • Give the process some time to complete. Install your operating system of choice, or use the blank disk for another purpose.
  • For more secure formatting, there are programs available which write zeros or garbage characters over the entire disk, making the deleted information unrecoverable.
  • C: and /dev/hda are your primary partitions. If you are trying to format another partition or drive, replace C: or hda with the appropriate drive letter, such as D: or /dev/hdb, for example.
  • Advanced: Choose a good filesystem for your new partition. For Windows, NTFS is the best option. Linux and BSD are more varied. XFS or EXT3 are good choices. XFS has higher performance, while EXT3 has better recovery. Mac users should use HFS+. Solaris users should definitely choose ZFS. Dragonfly BSD users should consider HAMMERFS.

Edit Warnings

  • Make sure that you format the correct drive, and that you have backed up any data you don't want to lose.
  • Hard drives can have multiple partitions, so be sure to check which drive and which partition you're formatting. For example, a C: and D: partition may exist on one drive. It isn't unusual to have them exist out of sequence due to Microsoft's FAT and NTFS partitioning scheme. For example, C: and E: may be partitions on the first drive, and D: may be a partition on the second drive. If in doubt, you a partition tool such as Gparted or Fdisk to determine which partition is on which drive.

Edit Related wikiHows

Edit Sources and Citations

Articles for You to Write

Here is a list of suggested articles that have not yet been written. You can help by researching and writing one of these articles. To get started writing one of these articles, click on the red link of a title below.

Article Info

Last edited:
May 26, 2012 by Illneedasaviour

Categories:
Operating Systems | Hard Drives

Recent edits by: Saumil555, Lielie1017, Samantha (see all)

In other languages
Português: Como Formatar um HD, Deutsch: Wie man seine Festplatte formatiert

Article Tools

Share this Article:

Thanks to all authors for creating a page that has been read 160,176 times.

Was this article accurate?

YesNo


x

Thank Our Volunteer Authors.

Give this article a +1.