You might think that starting a car is easy, until you approach a 2002-up BMW with the Comfort Access system. Don't worry, it's easy once you first start one up. Here's the instructions on how to do so.
Edit Steps
- 1Unlock your BMW by pressing the top button on the Comfort Access remote control. The car will beep two or three times, depending on the model or type.
- 2Once the door locks click, the car is unlocked. Grasp the driver's door handle and pull it to open the door.
- 3Place the Comfort Access key in the upright position (gray buttons facing up) into the ignition until the dash screen lights and the radio readiness switches on.
- 4With your foot on the brake, depress the Start/Stop button once to start the car.
- 5To stop the car, depress the Start/Stop button once.
- 6Push in on the Comfort Access remote controller and pull out on it to remove it.
- 7Press the lock button (BMW symbol) once to lock the whole car.
Edit Tips
- DO NOT pull directly out on the Comfort Access remote to remove it. This will damage the controller.
- DO NOT hold in the start/stop button, as this will erase key codes, and you will have to have the dealership reset them.
- DO NOT lock the BMW with passengers or yourself locked inside it. They or you will set off the motion sensors, causing the alarm system to go off.
- DO NOT place your hand on the door handles before the door locks click. Then you will have to start the whole process all over once again.
Edit Things You'll Need
Edit Related wikiHows
Articles for You to Write
Here is a list of suggested articles that have not yet been written. You can help by researching and writing one of these articles. To get started writing one of these articles, click on the red link of a title below.
Article Info
Last edited:
April 3, 2012 by Gelojragonfly
Categories:
Cars
Recent edits by: BR, Leona, Mr handsome (see all)
