How to Clean a Driveway
Edited by Exterior Cleaning Services, Inc., Frostmaker84, Teresa, Snow Wolf and 3 others
How to pressure wash a driveway so that it stays cleaner for a longer period of time. The key is to use bleach before and after cleaning.
EditSteps
-
1Get prepared by clearing the driveway completely.Ad
-
2Set up your pressure washer and make sure it has a chemical injector.
-
3Prepare your chemical solution by carefully ( with safety glasses and gloves on) pouring some bleach into the chemical container and add just a few drops of dish washing soap per gallon of bleach.
-
4Apply the bleach solution to the driveway using the pressure washer with an injector and the chemical nozzle.
-
5Allow the chemical to soak for about ten minutes or longer if you can.
-
6Begin pressure washing with a surface cleaner attached to the pressure washer if you have one. If not use your 25 or 15 degree fan tip.
-
7Once the pressure washing is complete, thoroughly rinse on the dirt away from the clean concrete.
-
8Once this rinsing is complete, apply the bleach solution again and allow to soak for another ten minutes before rinsing or you can simply leave it to dry.
-
9Now your driveway will be clean and bright, and it will stay clean for much longer than if you don't use bleach.Ad
EditWarnings
- Use caution when cleaning with bleach. Wears safety glasses and gloves.
Article Info
Thanks to all authors for creating a page that has been read 20,795 times.