Ajuda:Editor Visual/Guia do usuário

This page is a translated version of the page Help:VisualEditor/User guide and the translation is 38% complete.

---

Nota: Ao editar esta página, você concorda em publicar a sua contribuição no âmbito da licença CC0. Veja Páginas de ajuda de domínio público para mais informações. editar · tradutor

---

• Página Inicial
• Deixe um comentário
• Relatórios

---

Sobre

---

• Por que estamos fazendo isso?
• [[VisualEditor/Rollouts|*VisualEditor/Rollouts]]
• Perguntas Frequentes
• Media Q&A (em inglês)
• Como usar o Editor Visual
  • Atalhos de teclado
• [[VisualEditor/Roadmap|* VisualEditor/Roadmap]]
• Relatórios de testes de usuário
• Portal de design
  • Referências e citações
  • Tabelas

---

Ajude no lançamento

---

• Atualize páginas de ajuda
• Incluindo TemplateData
  • Tutoria de TemplateData
• Ajude novos usuários
• Central de tradução
• Traduza & localize documentação
  • Como efetuar capturas de tela

---

editar · traduzir

If you would like to try VisualEditor without editing an article, here is a page where you can freely test it. You don't need an account to use VisualEditor on that page.

Abrindo o Editor Visual

Para editar uma página com o Editor Visual, clique na aba "Edit" no topo da página. Pode levar alguns segundos até que a página abra em modo de edição, e demorará mais se a página for muito longa. Um clique na aba "Edit source" abrirá o editor clássico de wikitexto.
Você também pode abrir o Editor Visual clicando no link "edit" de cada seção.

Primeiros passos: a barra de ferramentas do Editor Visual

A barra de ferramentas do Editor Visual aparece no topo da tela quando você começa a editar com o Editor Visual. Ela inclui alguns ícones familiares:
	Desfazer e Refazer as alterações que você fez.
	O menu suspenso Títulos: permite que altere o nível do título do texto. O título de seção padrão é "Título". The normal format for text is "Paragraph".
	Formatting: Clicking the "A" opens a menu. For any item to have an effect, you must have first selected (highlighted) some text. The "Bold" item (B) bolds the selected text. The "Italic" item (I) italicizes the selected text. The "Superscript" item (x2) causes the selected text to appear smaller than surrounding text and to be slightly higher than the surrounding text. The "Subscript" item (x2) causes the selected text to appear smaller than surrounding text and slightly lower than the surrounding text. The "Strikethrough" item (S) adds a solid bar through the selected text. The "Computer code" item (a set of curly brackets: {}) changes the font of the selected text to a monospaced font, which sets it apart from surrounding (proportionally spaced) text. The "Underline" item (U) adds a solid line beneath the selected text. The "Language" item (Aあ) allows you to label the language (for example, Japanese) and direction (for example, right-to-left) of the selected text. The final item (), called "Clear styling", removes all character formatting from the selected text, including links
	Linking tool: The chain is the linking tool. Clicking on it (usually after selecting some text) opens the link dialog.
	Cite menu: The "Cite" menu is used to add inline citations (also called "footnotes" or "references"). All projects have access to "Basic" reference formatting and the ability to "Re-use" citations, using this menu. This menu also gives you quick access to local citation templates, if these are enabled on your wiki. (Instructions for adding local citation templates to the Cite menu at a specific wiki are available at VisualEditor/Citation tool.)
	Lists & indentation: The first two items allow you to format text as either a "Bullet list" or a "Numbered list". The last two items allow you to decrease or increase the indentation level of list items.
	Insert: O menu "Insert" da barra de ferramentas do Editor Visual leva a várias opções de formatação extras opcionais, como a inclusão de referências e a transclusão de predefinições. The "Media" icon (a picture of mountains) opens the media dialog. The "Gallery" icon (a set of photos) allows you to insert a gallery to the page. The "Template" icon (a puzzle piece) allows you to edit templates. The "Comment" item (a speech balloon) allows you to insert comments that are not visible to readers; these comments can be seen only when in edit mode. The "Formula" icon (Σ) opens the formula inserter dialog. The "References list" icon (three books) opens a dialog in which you can specify where will references be displayed to the reader. Usually this only needs to be done once on every page. The "Hieroglyphs" icon (an ankh symbol - ☥) allows you to enter the hieroglyphics inserter. (See below.) The "Special character" icon (Ω) allows you to insert some special characters. (See immediately below.)
	Special character insertion: The "Special character" icon on the "Insert" menu, when clicked, displays a dialog showing many special characters. By clicking on a specific character, you place it into the text. These special characters include some standard symbols, accents, and mathematical symbols. (This list may be customized locally. See VisualEditor/Special characters for instructions.)
	The Page options menu is to the left of the Save page button. On this menu there are options to adjust page settings, such as whether the page is a redirect, or how it is indexed; to add, edit, or delete categories; and to see, using the "Language" item, the list of articles on the same subject that are in other languages. You can also switch (one-way only) from VisualEditor to the classic wikitext source editor without losing the editing work you've done.

Salvando as alterações

Quando você terminar de editar clique no botão verde "Save page" da barra de ferramentas. O botão verde não pode ser clicado se não foram feitas alterações. To cancel all your editing changes, just close your browser window.
Pressing the green "Save page" button opens a dialog. You can then enter a brief summary of your actions, mark your edit as minor, and add the page to your Watchlist. The box for the summary is the equivalent of the Summary (?): field in the wikitext editor. You can also review your changes using the "Review your changes" button to be sure they will work as intended before saving your changes. This is similar to the "Show changes" button in the wikitext editor. The "Cancel" button returns you to the page you were editing. You can save all of your changes later.

Editando links

	Links podem ser inseridos por meio do ícone "Link" (ligações em uma corrente) na barra de ferramentas, ou usando o atalho Template:Tecla (ou Template:Tecla em um Mac). If you select (highlight) text and then press the "Link" button, a link will be inserted using that text. For single-word links it's enough to just do it while the caret is on that word.
	Se você usar o botão ou o atalho, aparecerá uma janela em que poderá digitar o link. O Editor Visual tentará ajudá-lo com os links internos (aqueles para outras páginas da Wikipédia) procurando por prováveis correspondências quando você começar a digitar. VisualEditor will try to help with internal links by looking for likely matches as you begin to type.
	Once you have entered or selected the link, you complete the linking process by pressing ↵ Enter, pressing the "Done" button, or just clicking outside of the box. Your link will immediately appear on the VisualEditor page, but it will not be saved until you save the entire page.
	To link to a web page on another website, the process is the similar: you enter a URL in the box, and it will be added as an "External link".
	External links without labels look like this: [1]. You can add these by placing your cursor away from any word (e.g., after a space). Open the link tool by clicking on the button or pressing the shortcut keys. Type the URL in the box, and click the "Done" button to insert the link.
	Para alterar ou remover um link existente, clique no link no texto, depois pressione o ícone "Link" que aparece próximo a ele. Você também pode clicar no mesmo ícone na barra de ferramentas ou utilizar o atalho do teclado ⌃ Ctrl+K enquanto estiver nele. In the dialog, you can then change where the link goes. You can also remove the link altogether by pressing the "Remove" button in the lower left corner of the dialog. You can also open the link's target in another window by clicking on the "Open" button. (You might want do this to check if an external link is valid.)

Editando referências

Editando uma referência existente
	Para editar uma referência existente, clique nela no texto, e clique no ícone "Basic" (figura de livro) que aparece próximo a ela, ou no da barra de ferramentas.
	Clicando no ícone de Referências é aberto uma janela que inclui um mini-editor, aonde você pode editar o texto da referência. Many wikis use templates to format references. If a template is used in your reference, then all the text in the template will be highlighted when you click on the reference information. If a template was used and you've clicked on information in that template, then the Template icon (puzzle piece) will appear. Click on that to edit the content of the template, in the template mini-editor dialog.
	If, instead of the "Basic" icon (bookmark), what appears when you click on a reference is an icon for a standard template for citations, clicking on that icon will take you directly to the template mini-editor dialog.
	Inside the template mini-editor, you can add or remove types of information or change current content. Only fields (template parameters) that have content are supposed to be shown initially. To add fields, click on "Add more information" at the bottom of the mini-editor.
	Click on "Apply changes" when you're done.
Reutilizando uma referência existente
	Se a página já possui referências, você pode escolher reutilizar uma citação existente, se ela se aplicar ao texto que você deseja referenciar. Para reutilizar uma referência existente, posicione o cursor onde você gostaria de inseri-la no texto, e clique no ícone "Basic" (marcador) do menu "More".
	In the Reference dialog, look at the list for the reference you want to reuse, and select it. If there are many references, you can use the search box (labeled "What do you want to reference?") to list only those references that include certain text.
Adicionar uma nova referência
	To add a citation using the "Cite" menu, place your cursor where you want to add it in the text. Then select the appropriate citation type in the menu.
Using the "Basic" citation
	No editor de referências, você pode adicionar, editar e formatar a sua citação. You can make the reference belong to a given group, although normally this is left blank. (This option is used to display groups of references with the "References list" tool.)
	Se você está inserindo uma nova referência e você quer incluir uma predefinição nela, clique no ícone Transclusão (peça de quebra-cabeças) do menu "More" da barra de ferramentas do editor de referências.
	Then, look for the template you want to use, add it and edit it as you would any other template. (See the Editing templates section, below, if you need more information about templates.) Clique em "Apply changes" para retornar ao editor de referências, e "Apply changes" novamente para retornar à página.
	Se ainda não há uma lista de referências na página (por exemplo, se você está inserindo a primeira referência na página), você precisa inseri-la para que o texto de sua referência apareça. Place the cursor where you want to display the references list (usually at the bottom of the page), open the "Insert" menu and click the "References list" icon (three books).
	If you are using several groups of references, which is relatively rare, you can specify the group in this dialog. Only the references that belong to that group will be displayed here. The final step in the References list dialog is to click "Insert".
Using standard cite templates
	Your local wiki may have added extra citation templates to this menu. This offers quick access to the most-used citation templates. (Instructions for adding extra citation templates to your local wiki are available at VisualEditor/Citation tool.)
	Clicking on a template icon such as "Cite book" will take you into the template mini-editor for that template. Important information fields may be marked with an asterisk. While the most common fields will be shown, not all of them are required.
	To add additional parameters, scroll down in the template mini-editor and click on the "Add more information" option. Click on "Insert" when you're done.

Editing images and other media files

Editing images

Para inserir uma nova imagem (ou outro tipo de arquivo de mídia) na página, clique no ícone "Media" (uma fotografia de montanhas) no menu "More". a imagem será inserida onde quer que o cursor esteja.
Clicking the "Media" icon opens a dialog that automatically searches Wikimedia Commons and your local wiki for media files related to the title of the page you're editing. Você pode procurar por outros arquivos de mídia alterando o texto no campo de pesquisas da janela. Clique em uma imagem para selecionar um arquivo. This places the image onto the page you are editing.
After the image you selected is inserted into the page, another dialog will open. This dialog allows you to add and edit the caption of the image. The caption can contain formatting and links.
The media dialog also allows you to add alternative text captions, to help users who use screen readers, or who have disabled image display.
You can also set various parameters for the image in the "Advanced settings" window. These include the alignment, the type, and size of the image.
Quando terminar, clique "Apply changes" para fechar a janela e voltar para a janela do editor.
For an existing image, you can add or edit a caption or other settings by clicking on the image, then clicking on the "Media" icon that appears below the picture. You can resize an existing image by clicking on it, then moving the resize icon (the two-headed arrow on the bottom left). You can also drag and drop an image to a place higher or lower on the page.

Editing media galleries

To edit an existing gallery in VisualEditor, click that gallery. Then, near the bottom of the gallery, click the gallery icon (a set of photos). This brings up the gallery editor, with the full list of images included in the gallery.
The gallery editor is currently a simple box that allows you to edit existing galleries using wikitext markup. To add a new image to an existing gallery, type the file name, followed by a bar (|) and the caption for that image. You must put each image in the gallery on its own line. You can also edit this list to remove or rearrange images or to change captions. When you click the "Done" button, you will exit the gallery editor. You should then see your changes, with the gallery as it will now appear to readers. Remember that exiting the gallery editor does not save your changes. As with other changes made using VisualEditor, you must save the entire page in order to save your work.

Editando predefinições

To add a new template to the page, place your cursor where you want the template to be inserted, and click on the "Template" icon (puzzle piece) in the "Insert" menu.
Type the name of the template you want to insert. When you see it on the list, click on its name. Then click "Add template".
You can also edit templates that are already on the page by selecting them (they turn blue), and clicking on the "Template" icon (puzzle piece) that appears.
Adding a new template or opening an existing one opens the "Transclusion" dialog. If the template has have been updated to contain TemplateData information, then the dialog will show a list of individual parameters; otherwise, a link to the documentation will be available in the dialog. If you are editing an existing template, and the template has been updated, then the dialog will show the values for the parameters.
For an existing template, you edit the parameters already listed, and you can add additional parameters by clicking "Add more information", at the very bottom of the dialog.
Quando uma predefinição inclui outras predefinições, estas sub-predefinições aparecerão como parâmetros. Estas podem ser editadas ou removidas clicando no nome da sub-predefinição. Novas sub-predefinições são adicionadas seguindo os passos de adicionar um parâmetro. Você deve verificar a documentação da predefinição para se assegurar que a sub-predefinição é compatível.
Quando você terminar, clique "Apply changes" para fechar a janela e retornar para a janela do editor.
Substituindo predefinições
Quando uma predefinição têm que ser substituída, digite subst: (incluindo os dois pontos) antes do nome da predefinição. Autocomplemento não funciona com subst:; se o autocomplemento for essencial, adicione subst: apenas depois de encontrar a predefinição de que estiver à procura. Depois, clique no botão verde "Add template".
Adicionar os parâmetros como usual e "Apply changes".
Você não verá a predefinição expandir na página durante a fase inicial.

Editando categorias

	Para editar categorias, no menu "Page options", clique no botão "Categories".
	O botão "Categories" abre uma caixa que lista categorias existentes e permite que adicione umas novas. You have the option of setting or changing the general (default) sorting key, which used to determine where the page appears when listed with other pages in the same category. For example, the default sorting key for the article "George Washington" is "Washington, George", and so in the category "Presidents of the United States", the article is listed under the letter "W", not the letter "G".
	To add a category for a page, type the name of the category into the field "Add a category". As you type, VisualEditor will search for possible matching, existing categories. You can either select an existing category, or you can add a category that doesn't yet have its own category page. (Until that category page is created, your new category will show as a red link after you save all your editing changes.)
	To remove an existing category, click on it and click on the "Remove" icon (trash can) in the dialog that opens. Clicking on a category also allows you to specify a sorting key for that specific category. Such a sorting key overrides the default sorting key.
	Clique em "Apply changes" quando terminar para voltar ao editor da página.

Editing page settings

	To edit a page's settings, click to open the "Page options" menu, in the toolbar, and select the "Page settings" button.
	The "Page settings" button opens a dialog that shows several options.
	You can make a page a redirect to another page by checking the "Redirect this page to" checkbox, and then typing the name of the page to which you want to send the reader who tries to go to the page that you're editing. At the bottom is the option to prevent page renames from updating this redirect. This is very rarely used.
	You can change whether the page shows a Table of Contents by selecting one of these three buttons. The default option is "If needed", which shows a Table of Contents if there are three or more headings.
	You can make a page not show edit links next to each section header by checking this checkbox.
	Click "Apply changes" when you're done editing the Page options to return to the page editor.

Editing mathematical formulae

To add a new mathematical formula to the page, place your cursor where you want it to be inserted, and click on the "Formula" icon ("Σ") in the "Insert" menu on the toolbar.
A window will open in which you can type the formula, using LaTeX syntax. VisualEditor will update the formula as you type it, so you can see how it will look as you make changes. Once you are happy with the formula, click the "Done" button.
To edit an existing mathematical formula on the page, click on it and then click on the "Σ" icon that appears. This will open up the formula window, where you make changes.

Editando fórmulas matemáticas e outros itens especiais

Some items, such as poems and musical scores, are not yet supported by VisualEditor. Until they are, you will need to edit the source wikitext directly if you want to add these or change these.

Teclas de atalho

Many editors are used to entering wikitext directly, especially bold, italics and wikilinks. Keyboard shortcuts allow to quickly insert similar formatting without having to use toolbar items. Here are the common general shortcuts in VisualEditor:

Atalho para PC	Ação	Atalho para Mac
⌃ Ctrl+B	Negrito	⌘ Cmd+B
⌃ Ctrl+I	Itálico	⌘ Cmd+I
⌃ Ctrl+K	Inserir link	⌘ Cmd+K
⌃ Ctrl+X	Recortar	⌘ Cmd+X
⌃ Ctrl+C	Copiar	⌘ Cmd+C
⌃ Ctrl+V	Colar	⌘ Cmd+V
⌃ Ctrl+Z	Desfazer	⌘ Cmd+Z