How to Make an Almost Real Crossbow

1. 1
   Stick the iron bars with the glue.
   Ad
2. 2
   Glue the toothed bar upside the bar(let some space in the middle).
3. 3
   Screw the switch in any tip of the bar(upside).
4. 4
   Make 2 holes in the larger bar and the "warpy" bar.

e

1. 1
   Screw these holes to let prepared the main structure.
2. 2
   Make a hole in each side of the bar(the switch tip bar).
3. 3
   Pick the rope, make a little hook in each side(end), and close the end of the side of the rope.
4. 4
   Enter the tip of the "warpy" bar in the rope hole and close with the bracket(or clamp).
5. 5
   Do the same in the other side of the rope and the bar tip.
6. 6
   Put the iron mini bar downside the switch to when you pull the switch, the bar goes up.
7. 7
   Put the can openers in the holes in the beginning of the crossbow.
8. 8
   Put the springs in the toothed bar with the cylinders, so when you pull each opener, the toothed bar will go to you with the rope.
9. 9
   Put the arrow in the middle space between the 2 bars with the rope totally pulled and push the trigger.