Edit Article

  • 1,000 views

  • Edited by AshleyR and 3 others

  • Edited

These easy step-by-step instructions with picture will show you how to build a casket as a prop.


Incomplete_856.gif
This article has been tagged as a stub.


That means it's off to a good start, but still has plenty of room to grow before it reaches its full potential. Can you help it flourish? If you think the article offers complete and accurate instructions, feel free to remove this tag!

EditSteps

  1. 1
    Go to the local hardware store, Home Depot is an excellent choice. Buy 2 pieces of plywood that are 2 feet longer than the height needed by 3 ft and 2 pieces the height needed minus 2 ft. by 1.5ft. Also buy 3 pieces of plywood that are 1.5 ft. by 3 ft. also buy lots of nails, primer, and paint.
  2. 2
    Prime the wood with primer. After it has dried, paint it.
  3. 3
    Cut the 2 pieces that are the height plus 2 ft. by 3 ft. into the shape shown the cut edge should be 3 feet long. lay the pieces out like shown in the diagram.
  4. Screen shot 2010 08 12 at 12.19.12 PM.png
    4
    Nail all pieces, but the top, together as shown.
  5. 5
    Make comfortable accommodations on the inside of the casket.
Add your own method
Save

EditThings You'll Need

  • Lots and lots of nails
  • Plywood
  • Paint and wood primmer

EditRelated wikiHows

How to
Buy a Lot for Building

Article Info

Categories: Stub | Woodworking

Recent edits by: Mel, Krystle, AshleyR

Thanks to all authors for creating a page that has been read 1,444 times.

Did this article help you?

YesNo