Edit Article

Two Parts:Taking and using measurementsFitting the lock

A mortice (mortise) deadlock is a strong form of lock that is embedded within a cut-out pocket space inside the door (or furniture) structure, as well as having external components. If you want to fit one yourself, you'll need to be capable of woodworking as well as using the tools required to fit the lock.

Part 1 of 2: Taking and using measurements

  1. SafeShop1.jpg
    1
    Measure where the lock will fit on the door. As a guide, the height of your lock should be about 1 metre high.
  2. SafeShop2.jpg
    2
    Using your measurement, mark out both the top and bottom of the latch.
  3. SafeShop3.jpg
    3
    Measure and mark out a vertical central line. This will be your guide when drilling.
  4. SafeShop4.jpg
    4
    Place a wedge under the door to prevent it from moving while you work.
  5. SafeShop5.jpg
    5
    Use some tape to mark the depth of your lock on a 19mm augur drill bit.

Part 2 of 2: Fitting the lock

  1. SafeShop7.JPG
    SafeShop6.jpg
    1
    Starting from the top, make a series of holes. These will form the slot the lock will fit into.
  2. SafeShop8.JPG
    2
    Use a chisel to smooth the sides of the slot and clean away any excess wood so that the lock will fit easily.
  3. SafeShop9.JPG
    3
    Once the space is ready sit the lock case in, add the cover plate, and draw around all four edges. These lines mark the edges of the recess you'll need for the lock to sit flush with the door.
  4. SafeShop10.JPG
    4
    Using a hammer and chisel, make a series of cuts along all four edges. Follow this by making a series of cuts down the centre.
  5. SafeShop11.JPG
    5
    Carefully ease out the excess to form an indent.
  6. SafeShop12.JPG
    6
    Hold the lock against the door and mark the keyhole with a pencil. Use a bradawl if a pencil is too wide. Don't forget to mark both sides, as drilling from each side will prevent the wood from splitting.
  7. SafeShop13.JPG
    7
    Using a smaller drill bit than before (preferably a 9mm auger drill bit), drill two holes one above the other.
  8. SafeShop14.JPG
    8
    Use a chisel to "stitch" them together. This will form the keyhole.
  9. SafeShop15.JPG
    9
    Clean out any debris and push the lock into the slot. If it's a bit tight, give it a gentle tap with a hammer.
  10. Safeshop18.JPG
    SafeShop17.JPG
    SafeShop16.JPG
    10
    Attach the cover plate and use a drill bit smaller than the screws, to create two pilot holes. This will ensure that your screws do not split the wood.
  11. SafeShop19.JPG
    11
    Fit the keyhole covers on both sides around the keyhole space. Drill pilot holes for the screws and then attach.
  12. SafeShop20.JPG
    12
    Make sure the deadbolt works properly. Use the extended deadbolt to mark the door frame. This will show you where the strike plate needs to go.
  13. SafeShop21.JPG
    13
    Use these measurements to square the marks across the door casing.
  14. SafeShop22.JPG
    14
    Match the strike plate to your measurements and mark around all four edges.
  15. SafeShop23.JPG
    15
    Mark exactly where the deadbolt will sit.
  16. SafeShop24.JPG
    16
    Use a 19mm augur drill bit to drill two holes. This will form the recess the deadbolt will fit into.
  17. SafeShop26.JPG
    Safeshop25.JPG
    17
    Make a shallow recess for the strike plate with a hammer and chisel, just as you did on the door itself.
  18. SafeShop28.JPG
    SafeShop27.JPG
    18
    Make sure the strike plate sits flush and then pre-drill the pilot holes before attaching with screws.
  19. SafeShop29.JPG
    19
    Finally, check that the door closes and locks. If so, the job is complete.

We could really use your help!

Can you tell us about
bodybuilding?
Yes
No
bodybuilding
how to get veiny arms
Can you tell us about
healthy gardening soil?
Yes
No
healthy gardening soil
how to improve soil
Can you tell us about
dehumidifiers?
Yes
No
dehumidifiers
different ways to use a dehumidifier
Can you tell us about
car stereos?
Yes
No
car stereos
how to install a car stereo
Thanks for helping! Please tell us everything you know about
...
Tell us everything you know here. Remember, more detail is better.
Tips
Provide Details.
Please be as detailed as possible in your explanation. Don't worry about formatting! We'll take care of it. For example:
Don't say: Eat more fats.
Do say: Add fats with some nutritional value to the foods you already eat. Try olive oil, butter, avocado, and mayonnaise.
Submit

Sources and Citations


Article Info

Thanks to all authors for creating a page that has been read 20 times.

Did this article help you?
Yes No