Edit Article

Here's an easy way to make a cardboard Airsoft target that traps your pellets.

Ad

Steps

  1. Make an Airsoft "Trap" Target Step 1.jpg
    1
    Gather all of the supplies you will need. They are listed below.
    Ad
  2. Make an Airsoft "Trap" Target Step 2.jpg
    2
    Assemble the box as shown.
  3. Make an Airsoft "Trap" Target Step 3.jpg
    3
    Put all four flaps down and tape shut. Flip the box and repeat on the opposite side.
  4. Make an Airsoft "Trap" Target Step 4.jpg
    4
    Lay a target on the side of the box.
  5. Make an Airsoft "Trap" Target Step 5.jpg
    5
    Draw lines on the box tracing the sides of the paper as a template.
  6. Make an Airsoft "Trap" Target Step 6.jpg
    6
    Cut along the lines.
  7. Make an Airsoft "Trap" Target Step 7.jpg
    7
    Tape the flaps on the inside down, to prevent the pellets from getting stuck.
  8. Make an Airsoft "Trap" Target Step 8.jpg
    8
    Cut a hole on the top, to let the pellets out later.
  9. Make an Airsoft "Trap" Target Step 9.jpg
    9
    Tape the target onto the big hole on the side. Ensure that it is as tight as possible.
  10. Make an Airsoft "Trap" Target Step 10.jpg
    10
    Done! Your new target should look like this.
    Ad


Video



 This is another way to make a box target.

Warnings

  • Always let an adult do the cutting.

Things You'll Need

  • A knife
  • Tape
  • A cardboard box
  • A target (you can draw your own or print one from the Internet)

Related wikiHows

Load an Airsoft Pistol

How to
Load an Airsoft Pistol

Be an Airsoft Sniper

How to
Be an Airsoft Sniper

Cock and Shoot an Airsoft Gun

How to
Cock and Shoot an Airsoft Gun

Train As an Airsoft Sniper

How to
Train As an Airsoft Sniper

Article Info

Featured Article

Categories: Featured Articles | Airsoft

Thanks to all authors for creating a page that has been read 28,923 times.

Did this article help you?
Yes No

Become
an Author!

Write an Article