CCP/ECCP Capture Interrupt

When in Capture mode and a capture is made, the CCP Interrupt Flag bit (CCPxIF) of the Peripheral Interrupt Register (PIRx) is set. The interrupt flag can be monitored via software or an automatic interrupt can be initiated thus sending program control to an interrupt service routine. The interrupt flag must be cleared in software. For more detail on the interrupt structure of 8-bit devices refer to the Interrupts Training Module.

​

When the Capture mode is changed, a false capture interrupt may be generated. The software developer should clear the CCPxIF interrupt flag bit of the PIRx register following any change in Capture mode.

  Return to Top

© 2020 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.