microcontroller-boards

Code for paper 'OTA-TinyML: Over the Air Deployment of TinyML Models and Execution on IoT Devices'

SKiDL Microcontroller Board Wizard

Repositorio de aplicaciones con los microcontroladores PIC18F4550

Basic and Advanced experiments on AVR Microcontrollers

Microcontroller code and android app to control power outlet

My solutions for lab assignments of Embedded Systems MOOC by University of Austin Texas

Exemplos do kit SAME70-XPLD

An Exchange for Rotary Dial Telephones in PHP

MSP-EXP430G2 LaunchPad programming using Code Composer Studio. The MSP-Exp430G2 Launchpad Development Kit Is An Easy-To-Use Microcontroller Development Board For The Low-Power And Low-Cost MSP430G2X MCUS. It Has On-Board Emulation For Programming And Debugging And Features A 14/20-Pin Dip Socket, On-Board Buttons And Leds &Amp; Boosterpack Plug-In Module Pinouts That Support A Wide Range Of Modules For Added Functionality Such As Wireless systems, Displays, Amp & More. Code Composer Studio (CCStudio or CCS) is an integrated development environment (IDE) to develop applications for Texas Instruments (TI) embedded processors.

Microcontroller Development Board for the ATMega1284P which also works for the 644/324/32/16 derivatives. Fully Compatible with Arduino MightyCore

Basic exercises for PIC Micro-controllers using Mikro C for PIC16F877A. The mikroC PRO for PIC is a powerful, feature-rich development tool for PIC microcontrollers. It is designed to provide the programmer with the easiest possible solution to developing applications for embedded systems, without compromising performance or control.

Driver library for the TM4C123GH6PM Microcontroller

A queue manager embedded in an Atmel SAM R21 microontroller

Basic experiments on STM32 Microcontrollers - STM32F100RB VL Discovery

Firmware development for a low-cost Vaccine Refrigerator (VARE) using the STM32F407G-DISC1 Microcontroller programmed in C with PlatformIO IDE using the STM32 HAL Library and simulated with Renode™.

Projects for Raspberry Pi pico

Repository for the Homini Pulse Meter Monitor device.

Integration of Infineon's XMC microcontrollers into the Arduino IDE.

STM32 ARM Cortex M4 Microcontroller- Basic Exercises using STM32 Nucleo-64 development board with STM32F446RE MCU with Arduino Uno V3 connectivity support

This repo contains project - project about Embedded Electronics System Course when I was in college

BionicArm - electronic fingering style

An Internet of Things (IoT) Framework in PHP

Two interactive challenges created using Platform.io. They are playable once uploaded onto ST Nucleo F401RE microcontroller board. Includes hardware initialization and output commands.

A group of scripts to create projects, compile code, flash on board and debug on STM32F4 discovery board.

Yet another "easy" and fun development platform based on ATmega32U4 with USB PD protocol support and many other on-board goodies!

A blank-ish but properly working Raspberry Pi PICO project folder. And, a few extras.

The NXP (founded by Philips) LPC2148 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP), 32KB RAM, Vectored Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface. Programming LPC 2148 using Keil IDE Legacy support

Simple program to display LED patterns on the Curiosity HPC Development Board

ElectroBlocks is a "drag and drop" app for programming the Arduino. You use this with Serial Monitor, Bluetooth, NeoPixels, LED Matrix, IR Remotes and much more. It also has a debug block which will pause the program and print out all the variables. You can also save and see the code view as well.