Wiegand data logger, replay device and micro door-controller

Android app to lock/unlock/ring doors. Supports generic HTTPS/SSH/Bluetooth/MQTT and Nuki Smartlock.

What do you get when you mix a Raspberry Pi, a MySQL database, an RFID reader, an LCD touchscreen, a relay switch, an electronic door strike and a Twilio SMS account?

Door controller test tool for physical access control devices.

Controlling my garage using a NodeMCU board and a simple web app on a Raspberry Pi

IoT Smart Door Lock with Rfid Reader

OSX Menu Bar app for opening your KIWI doors remotely.

DRemote - Smart door lock

A set of projects for ESP WIFI modules, Which are made by Espressif Systems.

LabaDoor is the 3rd iteration of our doorlock. https://wiki.tolabaki.gr/w/DoorLock_v3

Door_Locker Two micro-controllers, one acts as a HMI (Human Machine Interface) This micro-controller has a Dio module, LCD Module, Keypad Module and UART Module This one will be used just interfacing with user. The other micro-controller will be responsible for controlling the motor (actuation part) This micro-controller has a Dio module, Timer Module, DC_Motor Module and UART Module This one will be used for just Controlling the motor that will act as the lock for the door. The scenario will be as following: 1- first use Mode: the user will be prompted to enter pass and confirm it using keypad, if passwords are matched the password will be saved to the internal EEPROM of the first micro-controller. If the passwords are not matched it will tell you that the passwords are not matched and ask you to re-enter passwords. 2- Operating Mode: LCD Shows Supported Operations: a- Open the door: If the user choose to open the door he will be prompted to enter the password, if he fails with 4 trials, he will have to wait for 30 seconds to re-enter the password again. if the password is right, a message will be sent to the other micro-controller using uart to open the door. b- Change Password : user must enter the old password first to change. 3- Opening the door: When the message of opening the door will be received at the second micro-controller, it will rotate the motor 0.5 in the clockwise direction. 4- Closing the door: At first micro-controller, a message will be shown: "[1]Close Lock", if the user entered 1 a message will be sent to the other micro-controller to close the door, the second micro-controller will receive the message and rotate motor will rotate 0.5 in the anticlockwise direction. The LCD at the first micro controller will reflect any action / State happens at the system. for example if the door is opening it should show : Lock is opened

node server that lets you sync users of rfid doors over MQTT

Arduino-powered remote magnetic door (un)lock

Bus Door Controller V1.0, STM32F4

Our Lab Project of Micro Processor

Project to control your door with Android app.

The central system to allow members access to the space

Carport Door Manager and Remote Control for Android.

This project provides a SmartThings actuator for a door, controlled through a REST interface on the Raspberry Pi.

Cola Makerspace Access Controller