Lua based interactive firmware for ESP8266, ESP8285 and ESP32

Wear-leveled SPI flash file system for embedded devices

A simple web user interface library for ESP32 and ESP8266

How to use ESP8266 as a Web Server

Full example of using SPIFFS with ESP32 VFS

Library to manage your firmware configurations written in C++

ESP8266 Sound F/X I2S web trigger

ESP32 firmware that sniffs PROBE REQUEST packets sent by smartphones looking for Wi-Fi connection in order to extract different types of information

LittleFS port for ESP-IDF

💾 ESP8266 Prequel to M5Stack-SD-Updater

🗜️ An Arduino library to unpack/uncompress tar, gz, and tar.gz files on ESP32 and ESP8266

Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

simple sketch of using ESP8266WebServer to switch relays on GPIO pins. It serves a simple website with toggle buttons for each relay

Ruuvitag data collector for ESP32

Saving, reading and changing settings from Json file on SPIFFS

A simple and beautiful file system for your Iot devices. For ESP8266, ESP32

A minimal library for binary data logging in ESP8266 systems

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

simple sketch for ESP8266 of using ESPAsyncWebServer to switch relays on GPIO pins, serves a simple website with toggle buttons for each relay and uses AsyncWiFiManager to configure WiFi network.

ESP_DoubleResetDetector is a library for the ESP32/ESP8266 Arduino platform to enable trigger configure mode by resetting twice.

Manage your ESP8266/ESP32 SPIFFS/LittleFS files with a simple web based interface

ESP32 with Web Server, Telnet Server, file system, FTP server and Real-time Clock, ...

A serial bootloader utility---using an ESP12E to upload programs to Arduino boards, using the SPIFFS file system.

Creates logs in file using the circular buffer algorithm

ESP32 width 32x32 RGB Matrix, OTA, SPIFFS

Code generator, generates code for a Web-server on the ESP8266 powered from Html pages with Razor-like syntax.

Library created to manage a circular queue or circular fifo buffer over SPIFFS. Used and tested explicitly on ESP32 MCU.

madWiFi Project on ESP8266

Simple WiFiManager for Blynk and ESP8266/ESP32 with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. DoubleDetectDetector feature permits entering Config Portal as requested.

ESP32 Remote Control with WebSocket