MPLAB® X IDE Plugin for J-Link

MPLAB® X IDE requires the SEGGER J-Link Probe plugin in order to communicate with the J-Link. Starting with MPLAB X IDE v2.15, this plugin is provided as part of the IDE.

Step_1.1.PNG

1

In MPLAB® X IDE, click on Tools > Plugins

Step_2.PNG

2

Click on the Available Plugins tab

Check the box beside SEGGER JLink Probe

Click Install, then Close

  Return to Top

© 2020 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.