The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:

sip.js(1128): uncompensated = uint16(data[0], data[1]);

Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media

Feature request

Is your feature request related to a problem? Please describe.
When we raise an internal error it may be quite some time before we get something in the dataflash log or in the mavlink stream. This makes it harder to correlate internal errors with codepaths.

Describe the solution you'd like
Emit a statustext and/or log message when we detect an internal error has

Ankit Shah and I are trying to use Gen to support a project and would love the addition of a dirichlet distribution

In the documentation, the width of the device panel of the robot compontent is too small and the joint limits values are not completely visible.
An horizontal scrollbar is added but this looks bad.
Instead the width should be big enough to display everything and no scrollbar should be visible.

Example:
https://www.cyberbotics.com/doc/guide/bioloid?version=released

![Screenshot from 2021-0

Hello

I was going through the costmap_2d_ros.cpp file, and there is a timer with 0.1 duration, that calls movementCB function, which updates the parameters robot_stopped_ and old_pose.
On searching for these two params int he whole navigation code, I didnt find anything that uses the values of these parameters.

I was wondering what is movementCB and these parameters for?