blynk-server

Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Smallest and Fastest Docker Container with IoT Blynk Private Server

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.

Enable inclusion of both ESP32 Blynk BT / BLE and WiFi libraries. Then run both WiFi and BT/BLE simultaneously, or select one to use at runtime after reboot. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM.

Tools for working with Blynk IoT Platform

Blynk flow sensor water meter to measure water consumption using Blynk, NodeMCU and Water Flow Sensor (I used YF-S201B).

An advanced Gate or Door counter and logger.

Blynk ESP8266 (NodeMCU) Program for PZEM 004T v3.0 Power Meter.

Платформа с приложением для iOS и Android для управления Arduino, ESP8266, Raspberry Pi и других плат микроконтроллеров через Интернет.

Blynk PZEM 004T 3 Phase failure motor automation.

Controlling the lights in your house using your voice is a great way to dip your toes into the smart homeworld. And if you already have a smartphone you can build your own smart switch using a few bucks.

Install the Blynk server on Raspberry Pi

ESP-12E NodeMCU Shield project I designed and the code I pieced together for indoor gardening.

This project proposes an IoT based fall detection and rescue system. The main objective here is to alert the user as well as a guardian/ doctor if there is a possibility of fall.

Wemos D1mini and DHT22 control relay for Bathroom ventilator

This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).

Local Blynk Server Using the Arduino connected via Serial/USB

A simple ported version of Blynk Server into the Macintosh system. Will automate the process of starting the server instead out of Terminal.

A system that uses proximity sensors to alert about intrusions via an email to the owner. A voice module also makes beep alert sounds. Uses Intel Edison board and Blynk Server.

The main intention is to provide a home automation system that is cheaper, highly efficient, and control home appliances using both speech command and mobile application. So it is very useful for differently disabled people who can not reach the switch.

Docker image that runs the Blynk server

A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.

Blynk server inside a Docker container

Garbage Monitoring and collection assistance project

LPG Gas Leakage Detection and realtime monitoring using Blynk platform along with alert notifications.

Blynk server wrapped in Docker

Simple Http Restfull API for Blynk