It seems CTRL+K gets assigned to trigger two different actions at the same time. Steps to reproduce:

1. get Clock to your circuit
2. click on it and then go to Properties tab
3. Click Shared Label Font
4. Cancel the font dialog but do not click anything else
5. Press CTRL+K

After step 5 you toggle the Auto-tick enabled option and at th

Since we're able to configure the Timekeeper for a Circuit, it would be helpful if the library also allowed mocking the TimeAfterFunc of the reopenCircuitCheck field. https://github.com/cep21/circuit/blob/700836dc9a95756136ce20df20ae5d3f3d8b59fd/v3/closers/hystrix/closer.go#L13-L23

https://github.com/cep21/circuit/blob/700836dc9a95756136ce20df20ae5d3f3d8b59fd/v3/faststats/timedcheck.go#

MCUSim has a separate issue tracker and a wiki located at trac.mcusim.org. You may visit it and list the active tickets by milestone.

There is a separate milestone called Patches Welcome which contains experimental features which could be useful to have. Please, pick up an issue or another [on

The symbolic computation of the admittance between two nodes as a function of the frequency (as well as the transfer function between two ports) is a core functionality of QuCAT, implemented in the core._Network.admittance and core._Network.transfer functions respectively.

However, there is not user-accessible function that would allow one to, for example, plot the impedance (one over the admit

Not sure if it should an enhancement or fix, but I noticed that quantum backpropagation does not work with a GPU register (reg |> cu). It raises "scalar getindex is disallowed" warning. Is there a workaround? GPU operation for expect'(..) can speed up calculations by a lot.