Robotics

Is your feature request related to a problem? Please describe.
The current RoomMemberQueryFilter doesn't support query by wxid (id of Contact), can we support this?

Describe the solution you'd like
Add id as a string type in RoomMemberQueryFilter
Describe alternatives you've considered

1. Find all contacts for the room and find out the matched id
2. Load the contact by id fir

The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:

sip.js(1128): uncompensated = uint16(data[0], data[1]);

Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media

For whatever reason the AP_OSD_ParamSettings.cpp has a list of copter flight mode names in an array but it hasn't been updated recently so it is missing entries for AUTO_RTL and TURTLE mode.

• The list of Copter flight modes can be seen here
• [AP_OSD's flight mode list is here](https://github.com/ArduPilot/ardupilot/

🐛 Bug

The documentation of DQN agent (https://stable-baselines3.readthedocs.io/en/master/modules/dqn.html) specifies that log_interval parameter is "The number of timesteps before logging". However, when set to 1 (or any other value) the logging is not made at that pace but is instead made every log_interval episode (and not timesteps). In the example below this is made every 200 timesteps.

From an office hours discussion.. many people have written small gym-like interfaces around Drake. We should provide one in drake master and a tutorial showing how to use it.

Here is the relevant documentation from gym. I'm not worried about the repo name / file structure advice, b

Steps to Reproduce

1. Create empty directory with the wizard
2. Add a robot and a join
3. In view, add "Show join axes"
4. Nothing seems to happens, because the line is too small

Expected behaviour
A line should appear.

Expected solution
Change the default lineScale value to 10, which make it visible, at least for a default project.
Two solutions, change the default templa