ICD 4: Connecting an RJ-11 Type Cable to an RJ-45 Jack on the Debugger

The MPLAB® ICD 4 In-Circuit Debugger has an RJ-45 connector for communication to the target. Connect the RJ-11 type cable into the RJ-45 connector by simply inserting it into the center of the RJ-45 connector. Refer to the figure for the connection pinouts.

RJ45_to_RJ11.png
Pin RJ-45 Function Pin RJ-11
1 TMS JTAG Test Mode Select
2 Reserved 1
3 PGC (ICSPCLK) Standard Com Clock/TCK (JTAG Test Clock) 2 PGC (ICSPCLK)
4 PGD (ICSPDAT) Standard Com Data/TDO (JTAG Test Data Output) 3 PGD (ICSPDAT)
5 GND Ground 4 GND
6 Vdd_TGT Power on target 5 Vdd_TGT
7 Vpp Power 6 Vpp
8 TDI JTAG Test Data Input

  Return to Top

© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.