Expand volumes on Azure Stack HCI and Windows Server clusters
Applies to: Azure Stack HCI, versions 21H2 and 20H2; Windows Server 2022, Windows Server 2019
This article explains how to expand volumes on a cluster by using Windows Admin Center and PowerShell.
Warning
Not supported: resizing the underlying storage used by Storage Spaces Direct. If you are running Storage Spaces Direct in a virtualized storage environment, including in Azure, resizing or changing the characteristics of the storage devices used by the virtual machines isn't supported and will cause data to become inaccessible. Instead, follow the instructions in the Add servers or drives section to add additional capacity before expanding volumes.
Expand volumes using Windows Admin Center
In Windows Admin Center, connect to a cluster, and then select Volumes from the Tools pane.
On the Volumes page, select the Inventory tab, and then select the volume that you want to expand.
On the volume detail page, the storage capacity for the volume is indicated. You can also open the volumes detail page directly from the Dashboard. On the Dashboard, in the Alerts pane, select the alert, which notifies you if a volume is running low on storage capacity, and then select Go To Volume.
At the top of the volumes detail page, select Expand.
Enter a new larger size, and then select Expand.
On the volumes detail page, the larger storage capacity for the volume is indicated, and the alert on the Dashboard is cleared.
Note
If you experince Windows Admin Center (WAC) not (yet) being able to expand your volume (e.g. when trying to expand thin provisioned volumes on HCI) - you may want to use PowerShell to accomplish the task.
Expand volumes using PowerShell
Capacity in the storage pool
Before you expand a volume, make sure you have enough capacity in the storage pool to accommodate its new, larger footprint. For example, when expanding a three-way mirror volume from 1 TB to 2 TB, its footprint would grow from 3 TB to 6 TB. For the expand to succeed, you would need at least (6 - 3) = 3 TB of available capacity in the storage pool.
Familiarity with volumes in Storage Spaces
In Storage Spaces Direct, every volume is comprised of several stacked objects: the cluster shared volume (CSV), which is a volume; the partition; the disk, which is a virtual disk; and one or more storage tiers (if applicable). To resize a volume, you will need to resize several of these objects.

To familiarize yourself with them, try running Get- with the corresponding noun in PowerShell.
For example:
Get-VirtualDisk
To follow associations between objects in the stack, pipe one Get- cmdlet into the next.
For example, here's how to get from a virtual disk up to its volume:
Get-VirtualDisk <FriendlyName> | Get-Disk | Get-Partition | Get-Volume
Step 1 – Expand the virtual disk
The virtual disk may use storage tiers, or not, depending on how it was created.
To check, run the following cmdlet:
Get-VirtualDisk <FriendlyName> | Get-StorageTier
If the cmdlet returns nothing, the virtual disk doesn't use storage tiers.
No storage tiers
If the virtual disk has no storage tiers, you can expand it directly using the Resize-VirtualDisk cmdlet.
Provide the new size in the -Size parameter.
Get-VirtualDisk <FriendlyName> | Resize-VirtualDisk -Size <Size>
When you expand the VirtualDisk, the Disk follows automatically and is resized too.

With storage tiers
If the virtual disk uses storage tiers, you can expand each tier separately using the Resize-StorageTier cmdlet.
Get the names of the storage tiers by following the associations from the virtual disk.
Get-VirtualDisk <FriendlyName> | Get-StorageTier | Select FriendlyName
Then, for each tier, provide the new size in the -Size parameter.
Get-StorageTier <FriendlyName> | Resize-StorageTier -Size <Size>
Tip
If your tiers are different physical media types (such as MediaType = SSD and MediaType = HDD) you need to ensure you have enough capacity of each media type in the storage pool to accommodate the new, larger footprint of each tier.
When you expand the StorageTier(s), the VirtualDisk and Disk follow automatically and are resized too.

Step 2 – Expand the partition
Next, expand the partition using the Resize-Partition cmdlet. The virtual disk is expected to have two partitions: the first is Reserved and should not be modified; the one you need to resize has PartitionNumber = 2 and Type = Basic.
Provide the new size in the -Size parameter. We recommend using the maximum supported size, as shown below.
# Choose virtual disk
$VirtualDisk = Get-VirtualDisk <FriendlyName>
# Get its partition
$Partition = $VirtualDisk | Get-Disk | Get-Partition | Where PartitionNumber -Eq 2
# Resize to its maximum supported size
$Partition | Resize-Partition -Size ($Partition | Get-PartitionSupportedSize).SizeMax
When you expand the Partition, the Volume and ClusterSharedVolume follow automatically and are resized too.

That's it!
Tip
You can verify the volume has the new size by running Get-Volume.
Next steps
For step-by-step instructions on other essential storage management tasks, see also:
Feedback
Submit and view feedback for