uart-interface

Python package to transfer data in a fast, reliable, and packetized form

C++ Interface for the Bosch-Sensortec's BNO055 compatible with Espressif's ESP32 SoC running esp-idf.

Basic UART TX/RX module for FPGA

usbasp improved firmware

A heavy modification of the original c_uart_interface_example, works on ARM Cortex-M4 STM32F4 (as an offboard processor)

Examples of applications based on RIOT-OS

An Object Pascal UART Terminal for USBasp UART firmwares.

The is for beginners/intermediates who seek core understanding of microcontroller principles: such as interfacing a single low-end CMOS 8051 micro-chip with some peripherals: where all working together as a system.

USSD sender/decoder with AT Commands - PySerial - python environment

Complete ASIC Design of UART Interface with Baud Rate Selection :- RTL to GDS2

A library that turns microcontroller's UART peripheral to a simple, multi-master bus system. The project also features an RPC library for a microcontroller, device auto-discovery, code upload, gateway between the bus and PC, java code to manage microcontroller's RPC on a higher level of abstraction.

Contains our SURP project-assembly code of Broadcom2835 processor as well as interfacing between linux host and Raspberry pi

Universal Asynchronous Receiver-Transmitter. Semester project of Digital Logic and System Design course of fall 2017, IIT Delhi.

VHDL codes for UART Interface; hardware communication protocol. contains Receiver & Transmitter units & RAM memory.

Wrapper around mbed UARTSerial with added timeouts

a simple FT232RL unit

SMS sender with AT Commands - PySerial - python environment

This repo has most common drivers with basic application and their simulations on Proteus.

The purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

sc16is750/752 driver for esp-idf