Tutorial: Improve your regulatory compliance
Microsoft Defender for Cloud helps streamline the process for meeting regulatory compliance requirements, using the regulatory compliance dashboard. Defender for Cloud continuously assesses your hybrid cloud environment to analyze the risk factors according to the controls and best practices in the standards that you've applied to your subscriptions. The dashboard reflects the status of your compliance with these standards.
When you enable Defender for Cloud on an Azure subscription, the Microsoft cloud security benchmark is automatically assigned to that subscription. This widely respected benchmark builds on the controls from the Center for Internet Security (CIS), PCI-DSS and the National Institute of Standards and Technology (NIST) with a focus on cloud-centric security.
The regulatory compliance dashboard shows the status of all the assessments within your environment for your chosen standards and regulations. As you act on the recommendations and reduce risk factors in your environment, your compliance posture improves.
In this tutorial you'll learn how to:
- Evaluate your regulatory compliance using the regulatory compliance dashboard
- Check Microsoft’s compliance offerings (currently in preview) for Azure, Dynamics 365 and Power Platform products
- Improve your compliance posture by taking action on recommendations
- Download PDF/CSV reports as well as certification reports of your compliance status
- Setup alerts on changes to your compliance status
- Export your compliance data as a continuous stream and as weekly snapshots
If you don’t have an Azure subscription, create a free account before you begin.
Prerequisites
To step through the features covered in this tutorial:
- Enable enhanced security features. You can enable these for free for 30 days.
- You must be signed in with an account that has reader access to the policy compliance data. The Reader role for the subscription has access to the policy compliance data, but the Security Reader role doesn't. At a minimum, you'll need to have Resource Policy Contributor and Security Admin roles assigned.
Assess your regulatory compliance
The regulatory compliance dashboard shows your selected compliance standards with all their requirements, where supported requirements are mapped to applicable security assessments. The status of these assessments reflects your compliance with the standard.
Use the regulatory compliance dashboard to help focus your attention on the gaps in compliance with your chosen standards and regulations. This focused view also enables you to continuously monitor your compliance over time within dynamic cloud and hybrid environments.
Sign in to the Azure portal.
Navigate to Defender for Cloud > Regulatory compliance.
The dashboard provides you with an overview of your compliance status and the set of supported compliance regulations. You'll see your overall compliance score, and the number of passing vs. failing assessments associated with each standard.
The following list has a numbered item that matches each location in the image above, and describes what is in the image:
- Select a compliance standard to see a list of all controls for that standard. (1)
- View the subscription(s) that the compliance standard is applied on. (2)
- Select a Control to see more details. Expand the control to view the assessments associated with the selected control. Select an assessment to view the list of resources associated and the actions to remediate compliance concerns. (3)
- Select Control details to view Overview, Your Actions and Microsoft Actions tabs. (4)
- In the Your Actions tab, you can see the automated and manual assessments associated to the control. (5)
- Automated assessments show the number of failed resources and resource types, and link you directly to the remediation experience to address those recommendations. (6)
- The manual assessments can be manually attested, and evidence can be linked to demonstrate compliance. (7)
Investigate regulatory compliance issues
You can use the information in the regulatory compliance dashboard to investigate any issues that may be affecting your compliance posture.
To investigate your compliance issues:
Sign in to the Azure portal.
Navigate to Defender for Cloud > Regulatory compliance.
Select a regulatory compliance standard.
Select a compliance control to expand it.
Select Control details.
- Select Overview to see the specific information about the Control you selected.
- Select Your Actions to see a detailed view of automated and manual actions you need to take to improve your compliance posture.
- Select Microsoft Actions to see all the actions Microsoft took to ensure compliance with the selected standard.
Under Your Actions, you can select a down arrow to view more details and resolve the recommendation for that resource.
For more information about how to apply recommendations, see Implementing security recommendations in Microsoft Defender for Cloud.
Note
Assessments run approximately every 12 hours, so you will see the impact on your compliance data only after the next run of the relevant assessment.
Remediate an automated assessment
The regulatory compliance has both automated and manual assessments that may need to be remediated. Using the information in the regulatory compliance dashboard, improve your compliance posture by resolving recommendations directly within the dashboard.
To remediate an automated assessment:
Sign in to the Azure portal.
Navigate to Defender for Cloud > Regulatory compliance.
Select a regulatory compliance standard.
Select a compliance control to expand it.
Select any of the failing assessments that appear in the dashboard to view the details for that recommendation. Each recommendation includes a set of remediation steps to resolve the issue.
Select a particular resource to view more details and resolve the recommendation for that resource.
For example, in the Azure CIS 1.1.0 standard, select the recommendation Disk encryption should be applied on virtual machines.
In this example, when you select Take action from the recommendation details page, you arrive in the Azure Virtual Machine pages of the Azure portal, where you can enable encryption from the Security tab:
For more information about how to apply recommendations, see Implementing security recommendations in Microsoft Defender for Cloud.
After you take action to resolve recommendations, you'll see the result in the compliance dashboard report because your compliance score improves.
Note
Assessments run approximately every 12 hours, so you will see the impact on your compliance data only after the next run of the relevant assessment.
Remediate a manual assessment
The regulatory compliance has automated and manual assessments that may need to be remediated. Manual assessments are assessments that require input from the customer to remediate them.
To remediate a manual assessment:
Sign in to the Azure portal.
Navigate to Defender for Cloud > Regulatory compliance.
Select a regulatory compliance standard.
Select a compliance control to expand it.
Under the Manual attestation and evidence section, select an assessment.
Select the relevant subscriptions.
Select Attest.
Enter the relevant information and attach evidence for compliance.
Select Save.
Generate compliance status reports and certificates
To generate a PDF report with a summary of your current compliance status for a particular standard, select Download report.
The report provides a high-level summary of your compliance status for the selected standard based on Defender for Cloud assessments data. The report's organized according to the controls of that particular standard. The report can be shared with relevant stakeholders, and might provide evidence to internal and external auditors.
To download Azure and Dynamics certification reports for the standards applied to your subscriptions, use the Audit reports option.
Select the tab for the relevant reports types (PCI, SOC, ISO, and others) and use filters to find the specific reports you need:
For example, from the PCI tab you can download a ZIP file containing a digitally signed certificate demonstrating Microsoft Azure, Dynamics 365, and Other Online Services' compliance with ISO22301 framework, together with the necessary collateral to interpret and present the certificate.
Note
When you download one of these certification reports, you'll be shown the following privacy notice:
By downloading this file, you are giving consent to Microsoft to store the current user and the selected subscriptions at the time of download. This data is used in order to notify you in case of changes or updates to the downloaded audit report. This data is used by Microsoft and the audit firms that produce the certification/reports only when notification is required.
Check compliance offerings status
Transparency provided by the compliance offerings (currently in preview) , allows you to view the certification status for each of the services provided by Microsoft prior to adding your product to the Azure platform.
To check the compliance offerings status:
Sign in to the Azure portal.
Navigate to Defender for Cloud > Regulatory compliance.
Select Compliance offerings.
Enter a service in the search bar to view its compliance offering.
Configure frequent exports of your compliance status data
If you want to track your compliance status with other monitoring tools in your environment, Defender for Cloud includes an export mechanism to make this straightforward. Configure continuous export to send select data to an Azure Event Hubs or a Log Analytics workspace. Learn more in continuously export Defender for Cloud data.
Use continuous export data to an Azure Event Hubs or a Log Analytics workspace:
Export all regulatory compliance data in a continuous stream:
Export weekly snapshots of your regulatory compliance data:
Tip
You can also manually export reports about a single point in time directly from the regulatory compliance dashboard. Generate these PDF/CSV reports or Azure and Dynamics certification reports using the Download report or Audit reports toolbar options. See Assess your regulatory compliance
Run workflow automations when there are changes to your compliance
Defender for Cloud's workflow automation feature can trigger Logic Apps whenever one of your regulatory compliance assessments changes state.
For example, you might want Defender for Cloud to email a specific user when a compliance assessment fails. You'll need to first create the logic app (using Azure Logic Apps) and then set up the trigger in a new workflow automation as explained in Automate responses to Defender for Cloud triggers.
Next steps
In this tutorial, you learned about using Defender for Cloud’s regulatory compliance dashboard to:
- View and monitor your compliance posture regarding the standards and regulations that are important to you.
- Improve your compliance status by resolving relevant recommendations and watching the compliance score improve.
The regulatory compliance dashboard can greatly simplify the compliance process, and significantly cut the time required for gathering compliance evidence for your Azure, hybrid, and multicloud environment.
To learn more, see these related pages:
- Customize the set of standards in your regulatory compliance dashboard - Learn how to select which standards appear in your regulatory compliance dashboard.
- Managing security recommendations in Defender for Cloud - Learn how to use recommendations in Defender for Cloud to help protect your Azure resources.
- Check out common questions about regulatory compliance.
Feedback
Submit and view feedback for